BT100-1L Multichannel laboratory peristaltic pump with up to 24 channels and 10 rollers
- Display can switch between flow rates and rpm
- Calibration capability for more accurate flow rate
- Graphic LCD together with rotary encoded switch makes it friendly and easy to use
- Higher torque to accept more pump heads and more channels
- RS485 communication interface available.
on stock
Article no
BT100-1L
$ 1,350.80
These multi-channel laboratory peristaltic pumps are essential instruments in the world of biological, chemical and medical research. The BT100-1L laboratory peristaltic pumps enable precise dosing and continuous liquid dispensing in a variety of laboratory applications.
This multi-channel peristaltic pump works on the basis of a peristaltic pump mechanism. They use hoses that are crimped by a rotating roller or hose crimp. This process creates a smooth, low-pulsation fluid flow, which is particularly important when precise dosages are required.
Laboratory applications for multi-channel peristaltic pumps
- Analytical chemistry: For the precise feeding of reagents into analytical devices.
- Biotechnology: In the cultivation of microorganisms, cell cultures or the production of biopharmaceuticals.
- Medical Research: For dispensing samples in clinical testing, drug discovery and medical diagnostic procedures.
- Environmental analysis: For monitoring water and soil samples in environmental studies.
- Food and Beverage Industry: For the production of food, beverages and pharmaceutical products.
Advantages of the BT100-1L laboratory pump
- Precision: These Multi-channel peristaltic pumps offer high dosing accuracy and repeatability.
- Low pulsation: The peristaltic pump mechanism ensures an even fluid flow with low pulsations.
- Contamination-free: Since the liquid only comes into contact with the tubing, there is little risk of contamination between different samples.
- Easy hose replacement: The hoses are easily replaceable, making cleaning and maintenance easier.
- Scalability: Multi-channel peristaltic pumps are available in various configurations, from a few channels to dozens, to meet the needs of the laboratory.
Technical Specifications
- Speed: 0.1 to 100.0 rpm, CW/CCW
- Speed resolution: 0.1 rpm
- Control mode: Control panel, external signal control and communication control are available.
- Speed control: Rotary coded switch coupled with membrane keypad
- Display: 128 × 64 graphic LCD for current running status
- External Control: Start/stop, direction and speed control ( 0 - 5V, 0 - 10V, and 4 - 20mA, external control module optional)
- Communication interface: RS485
- Power supply: AC220 V ± 10% 50/60 Hz (standard) or AC 110 V ± 10% 50/60 Hz (optional)
- Power consumption: <50 W
- Operating condition: Temperature 0 to 40 °C, Relative humidity < 80%
- Dimensions (L × W × H): 202 × 160 × 239 (mm)
- Drive weight: 5.3 kg
- IP rating: IP 31